X1M Pro QRP Transceiver

Written By EA3GCY

supervised and guaranteed by EA3GCY Javier Solans

X1M Pro Platinum
QRP HF Transceiver KIT


  • Frequency range: 100kHz - 30MHz on RX 80-40-20-15-10 Meters on TX 
  • Modes: USB-LSB-CW 
  • Receiver sensitivity, MSD: < 0.450 uV 
  • Power out: 4.5W. 
  • Power supply: 10-14Vdc, about 450mA/RX 1,8/TX 
  • RIT. SPLIT Dual VFO, 64 memory chanels. Iambic automatic keyer. Keyboard lock. Graphic display with contrast and brightness adjustment... 
  • Dimensions: 98 x 40 x 155 mm. 
  • Weight: 0,8kg aprox
Please, download manual for all technical specifications.
Manual en Español
English manual (Thanks! VE3FAL, W3FIS, W5COV)


- The X1M is a transceiver in a semi-kit fully modular form and very easy assembly. Can be assembled by any amateur with a minimum experience.
- The X1M is a QRP HF transceiver working in five ham bands: 80, 40, 20, 15 and 10 Meter.

- However, the transmission can be enabled from 0.1 to 30MHz for experimental purposes.
- The reception is continuous from 0.1 to 30MHz, although only X1M has optimized reception in the 5 bands of operation for which it has been designed.
- The unit has a backlit graphical display with brightness and contrast settings, 2 x 32 memory channels, VFOb VFOa, SPLIT, RIT etc.

- It incorporates an CW automatic keyer CW iambic A mode, with speed settings, sidetone frequency and delay time for "Full-break" or "Semi-break".
- A built-in CAT interface makes the X1M also suitable for automatic logging and control. The serial interface (9pin Sub-D) on the rear supplies TTL level (!) signals. The interface emulates an Icom radio (IC-718). (USB CAT interface cable, optional 10€ + VAT)


X1M Pro Platinum HF QRP Transceiver  PROMOTIONAL OFFER: 250,00€ NO STOCK (VAT-IVA not included)

USB CAT interface cable optional: 12€ IN STOCK (VAT-IVA not included)