ILER 17 MK2 / 3-4W QRP SSB Monoband Transceiver KIT

Written By EA3GCY


ILER QRP KIT HAM RADIO TRANSCEIVER SSB CW EA3GCY VXO TRX QRZ QSL

PERFECT FOR SOTA AND BACKPACK
17m Band. 3-4W out. Stable VXO and very low courrent, less than 35mA (no signal) RX, 800mA TX. PCB 100x120mm / 155 grams, heatsink included (no box).

ILER-17 MK2 SPECIFICATIONS

GENERAL:
  • Frequency Coverage: VXO tuning 20 a 100KHz segment in 17M band (60-70KHz for better stability). Bandwidth range is selected according L6 value in the VXO circuit.
  • Frequency Control: high stability VXO oscillator.
  • VXO 14.900MHz. custom crystal (upper limit aprox. 18.168MHz).
  • Variable capacitor tuning (polyvaricon).
  • Antenna: 50 ohms.
  • Power: 12-14VDC, 35mA receive (no signal), 100mA máx. receive. 700-800mA on transmit.
  • Parts: 51 resistors, 77 capacitors, 3 adjust resistors, 1 trimmer capacitor, 1 potenciometer (volume), 9 IC's, 8 transistors, 12 inductors, 6 RF transformers, 1 variable capacitor tuning, 7 crystals.
  • Controls: tuning, volume, RX switch attenuator
  • Connectors: micro/ptt, phone jack, antenna, DC in.
  • Board size: 100x120 mm.
TRANSMITTER:
  • RF Output: 3 – 4 W (12-14V)
  • 2º harmonic output: -45dB.
  • Other spurios signals: -40dB or better.
  • Carrier suppressión: better than -35dB
  • T/R Switching: PTT Relay.
  • Mike preamp & passband.
  • Mike type: dynamic, 600 ohms (no included).
RECEIVER:
  • Type: single conversion Superheterodyne. Balanced Mixer.
  • Sensitivity: 0.250uV mínimum discernible signal.
  • Selectivity: 4 pole crystals ladder filter (2,1KHz nominal bandwidth).
  • FI Frequency: 4.915MHz.
  • SSB Audio Preamp and AGC on board 
  • Audio output: 250mW @ 8ohms.

ILER-17 MK2 SSB QRP 17M Transceiver VXO CRYSTAL NO INCLUDED. 76,00€ IN STOCK  New version MK2 

14.900 MHz VXO CRYSTAL for ILER-17 MK2. 18,00€ IN STOCK

ILER-17 MK2 + ILER-DDS Special price Pack. 120,00€ IN STOCK  New version MK2



Descargar: manual en español           Download: english manual